How to install a Floor Decal
STEP 1: Ensure the floor is clean and dry. Sweep or vacuum any dirt or debris, and mop the area if necessary. let it dry after cleaning.
STEP 2: Put the decal in the desired position on the floor. Use can take a tape measure to determine the precise location where you want to place the decal. Mark the spot lightly with a pencil if needed.
STEP 3: Carefully peel the backing paper from the floor decal. Start from one edge and place it on the floor. Be cautious not to touch the adhesive side to prevent contamination.
STEP 4: Gently place the exposed adhesive side of the decal onto the floor, aligning it with your markings. If the decal is large, you can use a small amount of masking tape at the top edge to hold it in place temporarily.
STEP 5: Use a squeegee or a flat, smooth tool to carefully smooth out the decal from the center towards the edges. This will help remove any air bubbles or wrinkles. Start from the middle and work your way out.
STEP 6: Rub over the whole sticker firmly to make sure it’s stuck to the surface well.
Full video tutorial
Book your installation
We offer installation services for all types of wall and floor decals, graphics, windows, and cars. Printing a good quality design is not only important if it doesn’t install well. You can also install yourself if it is a small decal or sticker. For large printing, we recommend you to hire a professional for the wall decal installation. The wall decal installation also depends on the type of surface, if it is indoors or outdoor.
We are a team of professionals who have installed approximately 900 designs and they install 3-5 projects in a week. For large projects, you can request a site survey. That’s a $125 fee which will be deducted if you end up ordering a large project with us. Our team will come, bring samples, ideas, measuring the wall, and test the vinyl’s graphics. Through the site survey, you will get an idea about the material type and sizes. Our team will take the measurements and will also show you the options.